Hỗ trợ trực tuyến

0938 176 099

Thống kê truy cập

Hôm nay
53
Trong tuần
245
Tổng cộng
378606
Có 1 khách đang trực tuyến
Hôm nay : 29/3/2024

GEARHEAD

Parallel Gearhead, Worm Gearhead and Inter-decimal Gearhead are available to be attached to the motor of gear type shaft of DKM possess the wide range of gear ratio from 2:1 to 360:1.
Features of DKM Gearheads
- Small type having a big transfer capability
- Good durability
- Wide range of gear ratio

Parallel Gearhead
- Frame Size: 60/70/80/90mm
- Gear Reduction Ratio
6GBD( )MH 3 / 3.6 / 5 / 6 / 7.5 / 9 / 10 / 12.5 / 15 / 18 / 20 / 25 / 30 / 36 / 40 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / 200 / 250
7GBK( )BMH 3 / 3.6 / 6 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180
8GBK( )BMH 3 / 3.6 / 5 / 6 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 40 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / 200 / 250 / 300 / 360
9GBK( )BMH 2 / 3 / 3.6 / 5 / 6 / 7.5 / 9 / 10 / 12.5 / 15 / 18 / 25 / 30 / 36 / 40 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180
9PBK( )BH 2 / 3 / 3.6 / 5 / 6 / 7.5 / 9 / 12.5 / 15 / 18 / 20 / 25 / 30 / 36 / 40 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180
9PFK( )BH 2 / 3 / 3.6 / 5 / 6 / 7.5 / 9 / 12.5 / 15 / 18 / 20 / 25 / 30 / 36 / 40 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180
9HBK( )BH 3 / 3.6 / 6 / 9 / 12.5 / 15 / 18 / 20 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180
9HFK( )BH 3 / 3.6 / 6 / 9 / 12.5 / 15 / 18 / 20 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180
 
General Box Type
(GB Type)
Powerful Box Type
(PB Type)
Powerful Flange Type
(PF Type)
High Powerful Box Type
(HB Type)
High Powerful Flange Type
(HF Type)
Worm Gearhead
Worm Gearheads allow the motor to be installed at the right or left axis of equipment such as conveyor belts. Worm Solid Type and Worm Hollow Type are available.
 
- Frame Size
Worm Solid Type: 80/90mm
Worm Hollow Type: 90mm
- Gear Reduction Ratio
8WD( )BL/BR/BRL 10 / 12 / 15 / 18 / 25 / 30 / 36 / 50 / 60
9WD( )BL/BR/BRL 10 / 12 / 15 / 18 / 25 / 30 / 36 / 50 / 60
9WHD( ) 7.5 / 10 / 15 / 20 / 25 / 30 / 40 / 50 / 60 / 80
 
Worm Solid Type
(Direction of Output shaft: Left) 
Worm Solid Type
(Direction of Output shaft: Right) 
Worm Solid Type
(Direction of Output shaft: Bi-directional) 
Worm Hollow Type
 
Gearhead output shaft is at the right angle with motor output shaft. So it allows the motor to be installed at the right angle with load side. In the maximum use of space, it is very effective.

Inter-Decimal Gearhead
In case of requiring high gear ratio that cannot be generated by single gearhead, X10 Inter-Decimal Gearhead is used with general gearhead. In this case only speed will reduce by 10:1 without torque increasing.
 



 

CÔNG TY TNHH DKM VINA – TRỤ SỞ TP.HCM
Địa chỉ : 51/5B Giải Phóng, Phường 4, Quận Tân Bình, TP.HCM
Điện thoại: 028 6659 8927 - Hotline : 093 8176 099            
​​Email : dkmvinamotor@yahoo.com - dkmvinamotor@gmail.com                        
Homepage : www.dkmvina.com